So I was wrapping up swapping my bars out trying to get all the wiring back in the neck, and somehow unplugged my ignition, now I can't get the ****er back in, seems like the plug is up in the neck and I'm trying to plug it back in by feel to no avail.....tips?

 

Pull the plastic shield on the bottom of the frame off and dig it out. It's just above the front cylinder.

 

Been trying to but it feels like its attacked inside the neck of the frame?

 

Help...I'm an idiot

We all are at times
==================

May need to level set, remove the tank - then "fish" it out

Got afish tape..., old aerial..., maybe a metal coat hanger - sitting around

Good "fishing"

Ghost

 

There are two side tabs and a tab towards the rear on the plastic cover. The holes the side tabs go in to are behind the tank so it helps to lift the front end of the tank.

 

what the **** were you using too dislodge the switch,, the next thing you need too ask is how too remove the ignition barrel from the frame...