Accessory fuse blowing
Seasoned HDF Member
Joined: Mar 2010
Posts: 38,460
Likes: 6,378
From: Honah Lee
Thanks for reading between the lines since I ment one lead on ground. I added it above if anyone else reads this in future.
What reading was your ohm meter set on with the 982. Thinking maybe your TSSM signal/alarm may show just a trace since its always drawing a slight amount of voltage in milliohms.
What reading was your ohm meter set on with the 982. Thinking maybe your TSSM signal/alarm may show just a trace since its always drawing a slight amount of voltage in milliohms.
I had meter on wrong setting.....do you know what white wire with green strpe goes to? I was checking tssm connection and I that one pin didn't have continuity. Either way it still blew fuse disconnected, so I will move to switch housing
Thread
Thread Starter
Forum
Replies
Last Post
Tremaine Gibbs
Touring Models
3
Aug 9, 2020 10:06 AM
