How high riser to handle bar
Thread Starter
|
Road Captain
Joined: Jan 2007
Posts: 556
Likes: 12
How high riser to handle bar
I would like to raise my handle bars on my 2013 street bob . Presently they are mini aps 10 in. Can I add two inches via a 3 inch riser and not need to re cable or interfere with my fall away.
Right now I have the oem one inch riser.
Thank You,
Roger
Right now I have the oem one inch riser.
Thank You,
Roger
Advanced
Joined: May 2020
Posts: 96
Likes: 125
From: PEI Canada
Im not entirely sure of the stock height on the street bob but I changed to 12" mini apes and 1" risers on my fxdl using the stock cables. Mine had the gross stock angled risers and bars that rose a few inches ontop of that originally
Novice
Joined: Jul 2020
Posts: 20
Likes: 5
From: Abilene, TX
That's good to know. I also have a FXDL (2016) and look forward to getting rid of that riser/handlebar/headlight contraption. I've heard 10" LD San Diego bars will work with the stock cables. Your setup gives me more confidence that it will.
Road Warrior
Joined: Oct 2020
Posts: 1,621
Likes: 9,655
From: GA
Try taking the top clamp off the risers and lift your existing bars up a few inches. Take a good look at the clutch cable and brake line. Dont forget to consider the extra bit of slack needed to turn lock to lock, may possibly need to pull a bit of extra wire out of the backbone.
Thread
Thread Starter
Forum
Replies
Last Post
