deuce wheel installation kit
Thread Starter
|
Tourer
Joined: Dec 2006
Posts: 282
Likes: 0
From:
deuce wheel installation kit
i installed a deuce solid rear wheel on my streetbob.... i know that harley makes an installation kit to install the chrome deuce wheel on the dyna...
everything went ok, except the rubber donut that seals the back on the pulley, was too thin and i had to glue it to the wheel... i think there is supposed be some sort of shim that seals the brake side of the wheel also.....
has anyone bought and installation kit and has the part number for the donut and the shim?
i hate to have to buy the entire kit to get those parts..
everything went ok, except the rubber donut that seals the back on the pulley, was too thin and i had to glue it to the wheel... i think there is supposed be some sort of shim that seals the brake side of the wheel also.....
has anyone bought and installation kit and has the part number for the donut and the shim?
i hate to have to buy the entire kit to get those parts..
Tourer
Joined: Oct 2007
Posts: 439
Likes: 22
From: League City, Texas
RE: deuce wheel installation kit
I bought a duece wheel for my bob, but it was from someone who already had it on a dyna. I just pretty much put on my pully, disk, and bolted it up. Everything lined up with the stock spacers.
[IMG]local://upfiles/46323/F0651F6BA5C249EC9E896B0A7E9D3A80.jpg[/IMG]
[IMG]local://upfiles/46323/F0651F6BA5C249EC9E896B0A7E9D3A80.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
milesvdustin
Dyna Parts
3
Jul 20, 2014 02:13 PM
