Front pipe bracket
Thread Starter
|
Tourer
Joined: Aug 2007
Posts: 287
Likes: 0
From: Dorset, UK
Front pipe bracket
I was sure I'd seen a thread on this before but I can find it [:@]
Has anyone found a way of removing the front pipe bracket (the one that sits under the footbrake lever)?
One of the bolts sits above the frame rail and I can't get to it properly and don't want to round it off.
Has anyone found a way of removing the front pipe bracket (the one that sits under the footbrake lever)?
One of the bolts sits above the frame rail and I can't get to it properly and don't want to round it off.
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,225
From: the 50s & the 60s
RE: Front pipe bracket
ORIGINAL: larazauk
I was sure I'd seen a thread on this before but I can find it [:@]
Has anyone found a way of removing the front pipe bracket (the one that sits under the footbrake lever)?
One of the bolts sits above the frame rail and I can't get to it properly and don't want to round it off.
I was sure I'd seen a thread on this before but I can find it [:@]
Has anyone found a way of removing the front pipe bracket (the one that sits under the footbrake lever)?
One of the bolts sits above the frame rail and I can't get to it properly and don't want to round it off.
https://www.hdforums.com/m_2563443/tm.htm
mud
Thread Starter
|
Tourer
Joined: Aug 2007
Posts: 287
Likes: 0
From: Dorset, UK
RE: Front pipe bracket
Thanks Mud, not surethat threadstalking about the same bracket though?
The one I mean sits under the footrest brake side and you can't even get a torx bit on it
The one I mean sits under the footrest brake side and you can't even get a torx bit on it
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,225
From: the 50s & the 60s
RE: Front pipe bracket
ORIGINAL: larazauk
Thanks Mud, not surethat threadstalking about the same bracket though?
The one I mean sits under the footrest brake side
and you can't even get a torx bit on it
Thanks Mud, not surethat threadstalking about the same bracket though?
The one I mean sits under the footrest brake side
and you can't even get a torx bit on it
OK zauk, maybe it's not.
Would you mind posting a picture of the one you are asking about??
I'm ignorant of any bracket under
the "footrest brake side" or "footbrake lever".
The one in that other thread is a bracket that bolts up
to the bottom of the right hand case, below the camchest,
inside of, and a little bit forward of,
the midmount footpeg/brakelever mount.
mud
Tourer
Joined: Apr 2006
Posts: 463
Likes: 0
From: Arizona
RE: Front pipe bracket
You need to grind the back end of a torx bit, the end that would go into a socket, get a Ø1/4" closed end wrench (preferably a six point) & remove the torx screw. Be sure you grind enough off the backside of the torx bit so that as you back the screw out you have enough room between the frame rail. It's a bit tedious & awkward getting that 3rd screw out. I've removed mine and my neighbor's exhaust brackets this way. Be patient you'll get it.
If you don't get what I'm talking about I can post a pic of this very simple tool combination.
If you don't get what I'm talking about I can post a pic of this very simple tool combination.
Thread Starter
|
Tourer
Joined: Aug 2007
Posts: 287
Likes: 0
From: Dorset, UK
RE: Front pipe bracket
ORIGINAL: Azgunner
You need to grind the back end of a torx bit, the end that would go into a socket, get a Ø1/4" closed end wrench (preferably a six point) & remove the torx screw. Be sure you grind enough off the backside of the torx bit so that as you back the screw out you have enough room between the frame rail. It's a bit tedious & awkward getting that 3rd screw out. I've removed mine and my neighbor's exhaust brackets this way. Be patient you'll get it.
If you don't get what I'm talking about I can post a pic of this very simple tool combination.
You need to grind the back end of a torx bit, the end that would go into a socket, get a Ø1/4" closed end wrench (preferably a six point) & remove the torx screw. Be sure you grind enough off the backside of the torx bit so that as you back the screw out you have enough room between the frame rail. It's a bit tedious & awkward getting that 3rd screw out. I've removed mine and my neighbor's exhaust brackets this way. Be patient you'll get it.
If you don't get what I'm talking about I can post a pic of this very simple tool combination.
Mud I think we are talking about the same one, my apologies for not being clear enough about it, see above!
Trending Topics
Banned
Joined: Jan 2007
Posts: 4,144
Likes: 1
From:
RE: Front pipe bracket
This works Great 25.00 PhatPerformance...
[IMG]local://upfiles/24219/BF2389EF9D15493897BE8F86742E4F77.jpg[/IMG]
[IMG]local://upfiles/24219/BF2389EF9D15493897BE8F86742E4F77.jpg[/IMG]
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Tourer
Joined: Aug 2007
Posts: 287
Likes: 0
From: Dorset, UK
RE: Front pipe bracket
ORIGINAL: Trotter
This works Great 25.00 PhatPerformance...
[IMG]local://upfiles/24219/BF2389EF9D15493897BE8F86742E4F77.jpg[/IMG]
This works Great 25.00 PhatPerformance...
[IMG]local://upfiles/24219/BF2389EF9D15493897BE8F86742E4F77.jpg[/IMG]
Tourer
Joined: Apr 2006
Posts: 463
Likes: 0
From: Arizona
RE: Front pipe bracket
Here ya go. The pic with the two torx bits is to show you the difference on how short to grind the back end of the bit. Grind the bit so it is a little under .750" long or right around 18mm in your case would be perfect. You can wedge something in the wrench with the bit to keep it from sliding out or use a screw-driver or something to help hold the bit up into the screw. Like I said it is a very awkward screw to get out so prepare to get on the floor & do some squirming around.
[IMG]local://upfiles/11153/8DB8AC180ACA4807B0D70E9535768D53.jpg[/IMG]
[IMG]local://upfiles/11153/69864B2602434136AD85F9491DFE8797.jpg[/IMG]
[IMG]local://upfiles/11153/6E48DA3B0D9449CDB5C57F61C0B856A0.jpg[/IMG]
[IMG]local://upfiles/11153/8DB8AC180ACA4807B0D70E9535768D53.jpg[/IMG]
[IMG]local://upfiles/11153/69864B2602434136AD85F9491DFE8797.jpg[/IMG]
[IMG]local://upfiles/11153/6E48DA3B0D9449CDB5C57F61C0B856A0.jpg[/IMG]
