Question about computer module
Club Member
Joined: Nov 2007
Posts: 4,474
Likes: 6
From: Port Charlotte, Florida
RE: Question about computer module
I just pulled out my shop manual 2007 Dyna and if it truely is #31 it is labeled Battery in my book and BE/GY and goes to the system Relay as well as the ecm fuse 15amp other side of fuse goes to Battery / ignition switch / and maxi fuse as well as supplies Battery line to another fuse on the fuse block.
now if thats the case i would say you need to fix it soon.
Now it its #32 its unused
#33 is Vehicle speed sensor
#34 unused
#35 Idle air control (A) low
#36 Idle air control (B) High
now if thats the case i would say you need to fix it soon.
Now it its #32 its unused
#33 is Vehicle speed sensor
#34 unused
#35 Idle air control (A) low
#36 Idle air control (B) High
Thread Starter
|
Road Captain
Joined: Feb 2006
Posts: 620
Likes: 1
From:
RE: Question about computer module
yes, constant power is right.....anyone know what would happen if I run without #31? I called the Dealer and they basicly said we don't install pc111, so we can't help you, WTF? I was trying to avoid the inevitable, which is having to buy another powercommander because of one broken pin.
Thread
Thread Starter
Forum
Replies
Last Post
Boo2you
Touring Models
1
May 14, 2010 04:39 PM
