Tach addition source
Elite HDF Member
Joined: May 2008
Posts: 4,579
Likes: 10
From: S.E. MO
Thanks for the info guys. I looked at the drop in style speedo and tach but my FXD doesnt have that style. I would really love to put the handle bars, tach and speedo off of a FXDSE screamin eagle 07 model, I love that look, but where in the hell would I find the parts. Thanks again guys.
Mike
Mike
I have been debating doing the FXDSE set-up on mine as well. Using your speedo it will run about $750 to do this with a tach, even more if you want the FXDSE speedo as well. Still havent made up my mind which way to go.
Also the HD speedo/tach combo (4inch version) will fit in your current mount.
Thread Starter
|
Intermediate
Joined: Aug 2008
Posts: 33
Likes: 0
I have been debating doing the FXDSE set-up on mine as well. Using your speedo it will run about $750 to do this with a tach, even more if you want the FXDSE speedo as well. Still havent made up my mind which way to go.
Also the HD speedo/tach combo (4inch version) will fit in your current mount.
Also the HD speedo/tach combo (4inch version) will fit in your current mount.
ThanksMike
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,225
From: the 50s & the 60s
.
bb, 750 is probably real close, over the counter.
May be a lot less from Zanottis
Mike, there is a parts list at the link below,
there are also some pix in that thread from jmbear328 06 FXD
https://www.hdforums.com/forum/showt...11#post1253811
mud
.
May be a lot less from Zanottis
there are also some pix in that thread from jmbear328 06 FXD
https://www.hdforums.com/forum/showt...11#post1253811
mud
.
Thread
Thread Starter
Forum
Replies
Last Post
