2006 Dyna SERT map is out
Road Captain
Joined: Oct 2005
Posts: 631
Likes: 6
From: Indiana
RE: 2006 Dyna SERT map is out
Well after my HUGE debacle with getting the SERT to talk to the ECM (You can read about that in another post, suffice to say be sure you turn on the Run switch on the handlebars along with the keyed ignition) I was able to load up the calibration map for the 8 degree injectors, SE AC, and SE Pro II pipes which is calibration 141NX002.
The bike felt much stronger and accelerated much better than before with just the Harley Stage 1 download. Acceleration was not as "flat" as it was before and overall the bike felt great. There was however more popping and burbling on decel than before but I was also pushing harder than I ever had because I knew the mixture was much richer and therefore safer than it previously was. I would say there was more burbling (rich) than popping (lean) and it seems to be a safe calibration tune.
Weather permitting (may be a few days) I am going to load up the hdmap.com calibration map and see how that one performs compared to the SERT 141NX002 map. I expect it to be a spot-on map with great performance.
One more thing to note is that my spark plug color after riding with the SERT map for about 20 miles was MUCH darker and not near as white as they were previously with the Stage 1 download. Basically that's telling me that the bike is much happier with the SERT calibration map than the Stage 1 download.
The bike felt much stronger and accelerated much better than before with just the Harley Stage 1 download. Acceleration was not as "flat" as it was before and overall the bike felt great. There was however more popping and burbling on decel than before but I was also pushing harder than I ever had because I knew the mixture was much richer and therefore safer than it previously was. I would say there was more burbling (rich) than popping (lean) and it seems to be a safe calibration tune.
Weather permitting (may be a few days) I am going to load up the hdmap.com calibration map and see how that one performs compared to the SERT 141NX002 map. I expect it to be a spot-on map with great performance.
One more thing to note is that my spark plug color after riding with the SERT map for about 20 miles was MUCH darker and not near as white as they were previously with the Stage 1 download. Basically that's telling me that the bike is much happier with the SERT calibration map than the Stage 1 download.
Cruiser
Joined: Feb 2006
Posts: 228
Likes: 0
From: Northern Virginia
RE: 2006 Dyna SERT map is out
Power,
Sorry, I should of made a post about that run button, I ran into the same problem. Took me a little while to figure it out and a little frustration, I figured I was the only dumb*ss that didn't know it. It's nice to have company.
FL,
Tried increasing the VE tables by 5% no change. I guess I'll increase it a little more.
Sorry, I should of made a post about that run button, I ran into the same problem. Took me a little while to figure it out and a little frustration, I figured I was the only dumb*ss that didn't know it. It's nice to have company.
FL,
Tried increasing the VE tables by 5% no change. I guess I'll increase it a little more.
Thread
Thread Starter
Forum
Replies
Last Post
Wide06
Ignition/Tuner/ECM/Fuel Injection
3
Oct 14, 2007 07:55 AM
priceamp
Ignition/Tuner/ECM/Fuel Injection
3
Jul 24, 2006 07:24 PM
