have relocating kit for the lowrider having trouble finding instructions for removing wires from the plastic plugs thanks

 

get a paper clip and straighten it out then stick it in the end that goes in the plug to pull out the wire. there is a small hole around the inside of the connector you will see it (small and round)

 

Local parts stores(auto zone and the like) sell the correct tool for removing wires from connectors from all manufacturers like weatherpak,metripak,HD without damaging the connector or the pin.Short dough compared to electrical problems and corrosion later.

 

What I did was use a small finish nail, hold the plug with a pair of pliers, and tap the nail into each hole. The wires will pop out very easily. I used "My Ape Install" as a reference to relocate turn signals...