Curiosity here...which map # are you using?



I've been using the T-Max/T-Header setup for the past 5 months or so, and while the bike runs great at cruise and when laying on the throttle, I still have some issues with it tuning out the decel pop. I'm using map 525 with some minor tweaks aimed at adjusting the pop, and have also implemented the high and low rpm decel cuts.

I know T-Max w/AT is intended to allow you to pick a map and roll with it, but it's gotta be a pretty good map for your setup in order for this to work right.

Thanks for any answers.

 

Drop Zipper's tech support an email. Usually get back to you in a day or two. They can make a recommendation on the base map, as well as tuning out the decel pop. Sorry, not much help other than that.




Mike

 

I called them for my base map, it was easy to get through to a person that knew what was going on.

 

Emailed them and they recommended the exact map that's been giving me mixed results. I sent them the module details a couple weeks back and they never got back with me. Guess I'll have to try that again...