Neutral light and oil light
Thread Starter
|
Cruiser
Joined: Feb 2009
Posts: 127
Likes: 1
From: Marble Falls, TX
Neutral light and oil light
When coming to a stop and shutting down the bike I notice that my neutral and oil light don't work. But they do flicker if a put the kick stand down and back up kinda hard (like let the spring tuck it under the bike) Anyone know where these connections are? I will also check the battery connection when I get home. Thanks
Thread Starter
|
Cruiser
Joined: Feb 2009
Posts: 127
Likes: 1
From: Marble Falls, TX
You talking like under the tank? Where the front sig wires come out?
Road Master
Joined: Apr 2008
Posts: 992
Likes: 1
From: Mechanicsburg, PA
without looking at the wiring diagram, I do think both of those lights are powered on the same circuit. It is likely a loose connection near the front of the bike or possibly even a loose pin in the plug on the back of the indicator lights/speedo/etc. Oh, and check your fuses! Sometimes the simple things get by us easily.
Elite HDF Member
Joined: Aug 2006
Posts: 3,863
Likes: 21
From: Kennewick, WA
The connectors are a little deeper than the grommets. You have to access it from the bottom of the neck, right above the front rocker box (06 and newer). Have you washed the bike with a pressure washer recently? If so you may want to unplug the connectors at the sensors and make sure they are clean and dry.
Lorance, that headlight looks great on your bike!
Lorance, that headlight looks great on your bike!
Thread Starter
|
Cruiser
Joined: Feb 2009
Posts: 127
Likes: 1
From: Marble Falls, TX
The connectors are a little deeper than the grommets. You have to access it from the bottom of the neck, right above the front rocker box (06 and newer). Have you washed the bike with a pressure washer recently? If so you may want to unplug the connectors at the sensors and make sure they are clean and dry.
Lorance, that headlight looks great on your bike!
Lorance, that headlight looks great on your bike!
Thread
Thread Starter
Forum
Replies
Last Post
