Headlight Mounting
Thread Starter
|
Tourer
Joined: Oct 2008
Posts: 485
Likes: 0
From: Just outside of New Orleans, La.
Headlight Mounting
I have an 04 LR with the stock light, I just got a new bullet light from easternperformace. In looking at my triple tree the bottom is tapered sorta not flat. I need to drill a hole for the new light any advice on how to mount this light, or how to deal with the taper?
Jay
Jay
Outstanding HDF Member
Joined: Mar 2008
Posts: 2,062
Likes: 2
From: Southwest OHIO
your lowrider could be different... but on my 08 bob, you could unbolt the OEM headlight mounting tab and bolt the new tab to the tree... but i ended up using my OEM tab with the new headlight i mounted...
your new light or your trees could be totally different than mine, would have to see it to know for sure.
your new light or your trees could be totally different than mine, would have to see it to know for sure.
Road Master
Joined: Oct 2007
Posts: 1,213
Likes: 1
From: Hot Springs Village AR
Just drill a 1/2 inch hole in the bottom tree and mount the heqadlight, if you are close to Harley shop go look at a Sportster custom and see how the light is mounted, and then check out headwinds website for a bracket to hold your indicator lights it mounts the same place the eyebrow mounts hope this helped.
Thread Starter
|
Tourer
Joined: Oct 2008
Posts: 485
Likes: 0
From: Just outside of New Orleans, La.
Just drill a 1/2 inch hole in the bottom tree and mount the heqadlight, if you are close to Harley shop go look at a Sportster custom and see how the light is mounted, and then check out headwinds website for a bracket to hold your indicator lights it mounts the same place the eyebrow mounts hope this helped.
Jay
Thread
Thread Starter
Forum
Replies
Last Post
