APES ON THE BoB
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 3,818
Likes: 2
From: Twin Cities
APES ON THE BoB
I was looking to get new apes for my bob for my next mod. I want close to the same hight but thicker tube so i can hide those hiddous wires. I mesured the rise on them and its 12 " i thought they were 10.5 anyways if i go with a 12" ape do i have to replae anything but the bars or ?
[IMG]local://upfiles/8434/51F44F4CB06D4E9F98E924FE34B90651.jpg[/IMG]
[IMG]local://upfiles/8434/51F44F4CB06D4E9F98E924FE34B90651.jpg[/IMG]
Road Master
Joined: Feb 2006
Posts: 1,072
Likes: 0
From: I been around
RE: APES ON THE BoB
I believe they are a 10.5.
The WG has the 12" bars. Your wiring should be OK, and the throttle/idle cables too. Clutch cable might be tight, and you may be able to rig the brakeline to work.
The WG has the 12" bars. Your wiring should be OK, and the throttle/idle cables too. Clutch cable might be tight, and you may be able to rig the brakeline to work.
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 3,818
Likes: 2
From: Twin Cities
RE: APES ON THE BoB
just got off the phone with my stealer and they are 12"apes same as WGs now all i think i have to change is the brak cable cause its a hard line on the bar do or can i just replace the hose in the middle of the two hard lines or do i have to replace the whole darn thing
Thread
Thread Starter
Forum
Replies
Last Post
