After installing the Thunderheaser...something disorder?

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2009 | 10:54 PM

dynafan68

Thread Starter

Cruiser

Joined: Sep 2007

Posts: 150

Likes: 4

After installing the Thunderheaser...something disorder?

I did the TH installed sometime ago, I'm sure already lost one battery box screw, now I found there is one screw missing and I can't figure out what?
Please look at the pic, where the red circle is the location of the mystery!
you can laugh...but after please help!

[IMG]

[/IMG]

Oct 25, 2009 | 10:57 PM

Noride

Tourer

Joined: Oct 2006

Posts: 352

Likes: 0

From: Ventura, California

it looks like the top bolt on the mount is missing?

Oct 25, 2009 | 11:04 PM

Bob'n'Stang

Cruiser

Joined: Oct 2009

Posts: 227

Likes: 1

From: Daytona Beach Fl

Quote:

Originally Posted by Noride

it looks like the top bolt on the mount is missing?

Thats right. It's the same kind of bolt as the one beside it.

Oct 25, 2009 | 11:05 PM

ackman1968

Elite HDF Member

Joined: Aug 2006

Posts: 3,863

Likes: 21

From: Kennewick, WA

The hole is for a mounting bolt for the original exhaust bracket. You probably removed it when you pulled off the exhaust.

Oct 26, 2009 | 01:14 AM

dynafan68

Thread Starter

Cruiser

Joined: Sep 2007

Posts: 150

Likes: 4

How is the mounting bolt look like??

Oct 26, 2009 | 01:15 AM

dynafan68

Thread Starter

Cruiser

Joined: Sep 2007

Posts: 150

Likes: 4

Quote:

Originally Posted by Bob'n'Stang

Thats right. It's the same kind of bolt as the one beside it.

Is that one on the right side?

Oct 29, 2009 | 09:55 PM

dynafan68

Thread Starter

Cruiser

Joined: Sep 2007

Posts: 150

Likes: 4

I took a photo with the bolts, which I think one of them is the one fit in that threat!
Please help me to figure out! the long one seems too long, the short one diameter is too large!?[IMG]

[/IMG]

Trending Topics

blown oil pump gasket after oil change

21

412
Oil Thread: 2024+ Center-Cooled touring

116

10.5k
Dynojet autotune - can someone have a look at my results?

16

329
Well Monday will tell

46

1.3k
Base gasket leak and other ramblings

44

1.2k

Oct 30, 2009 | 07:13 AM

dyna rider

Club Member

Joined: Dec 2007

Posts: 4,192

Likes: 168

From: Knoxville, Tn

Missing Bolt

Stick something narrow in the hole and put your thumb and forefinger at the point it meets the outside of the hole. Get a ruler and measure the length to your fingers. IF the long one starts to screw into the hole easily and holds, then it is the proper size and thread pitch. After you figure out the length, head to a local hardware store.

Last edited by dyna rider; Oct 30, 2009 at 07:19 AM.