sissy bar ?
Thread Starter
|
Cruiser
Joined: Nov 2004
Posts: 179
Likes: 0
From:
sissy bar ?
I just bought a 01 Dyna Low Rider that has a min-rail sissy bar on it. I would like to get a detachable sissy bar and am not real sure about taking the mini-rail off. It is behind the fender support now, my question is if I take it off, is there a "plate" that I have to put between the fender and the support or will the it draw up tight once I tighten the bolts back up? Hope that question makes sense.
Thanks.
Thanks.
Banned
Joined: Oct 2004
Posts: 278
Likes: 0
From:
RE: sissy bar ?
The detachable SB fits outside of the fender support so the mounting that you now have is totally removed. The fender support is accomplished by the detachment bolts/parts that make up the detachment/attachment fittings that you will need from HD or ...
Hell, now I'm confused too!
BClem
Hell, now I'm confused too!
BClem
Thread Starter
|
Cruiser
Joined: Nov 2004
Posts: 179
Likes: 0
From:
RE: sissy bar ?
OK, I still confused.
Let me try to ask this in a different way.
Can I remove the mini-rail totally from my bike and just re-install the 2 bolts (1 allen head and the one behind the turn signal) to hold the fender support in place? I'll deal with the detachable sissy bar later.
Thanks.
Let me try to ask this in a different way.
Can I remove the mini-rail totally from my bike and just re-install the 2 bolts (1 allen head and the one behind the turn signal) to hold the fender support in place? I'll deal with the detachable sissy bar later.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
SportsterPapa
Softail Models
10
Nov 15, 2010 12:56 PM
