Part # request.
Part # request.
Can someone please post the part #'s for the following gaskets? Or scan the primary page out of the parts manual?
Outter Primary Cover...
Inner Primary Cover(between crank and primary)...
The little sticky gasket that goes around the shifter hole...
Thanks, Brian
Outter Primary Cover...
Inner Primary Cover(between crank and primary)...
The little sticky gasket that goes around the shifter hole...
Thanks, Brian
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
.
Brian, if you are removing the inner primary,
you will also want the 5 sealing bolts.
.
.
.
Thanks sofus.
Roger that mud, I already have the sealing bolts. I bought an extra set last year when I had the primary off. I'm gonna go ahead and give this 30T pulley a try and TIG weld the bolts on the back of my stator.
Roger that mud, I already have the sealing bolts. I bought an extra set last year when I had the primary off. I'm gonna go ahead and give this 30T pulley a try and TIG weld the bolts on the back of my stator.
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
.
Yeah, I thought I remembered you being in there before.
Good thinking on the stator.
I've reused that Outer Primary gasket a few times without problem..
Long as it looks decent.
.
.
.
Thread
Thread Starter
Forum
Replies
Last Post
