200 tire without any mods?
Cruiser
Joined: Apr 2008
Posts: 122
Likes: 0
From: the netherlands
teh license plate was already on that location....
Road Warrior
Joined: Aug 2007
Posts: 1,392
Likes: 43
From: South Australia
all the info is in the link I gave, most of the work was due to the offset of my new rim being different to the standard rim so had to make spacers etc.
If you were lacing new rim to your standard hub or got a wheel with the corect offset there isn't much work to do at all.
Mainly tidying up the wiring and bolts under the fender which is covered in my post.
If you were lacing new rim to your standard hub or got a wheel with the corect offset there isn't much work to do at all.
Mainly tidying up the wiring and bolts under the fender which is covered in my post.
Road Master
Joined: Oct 2008
Posts: 886
Likes: 6
Daggs, thanks for your post. I already have a 5.5" wheel on the back of mine so centering should not be the issue, it should all just boil down to the fender clearance. And I have already moved the tail lights so again no issues but fender clearance. Will see at the next change.
Thread
Thread Starter
Forum
Replies
Last Post
