Quick help?
Thread Starter
|
Advanced
Joined: Jun 2010
Posts: 83
Likes: 0
From: Door County, WI
Quick help?
I am installing 2" by 40" long drag pipes on my '95 dyna superglide. It has a stock aircleaner. I have done some research and have come up with a carb setting of a 45 pilot jet and a 170 for a main, two shims under the needle and 2 turns out on the a/f mixture screw. But I can only get a hold of a 42 right now. The one in the carb now is a 46. likes to foul out the rear plug. Will a 42 work or is that gonna be too lean? Gonna run a 170
for a main. I do have torque cones for the pipes.
for a main. I do have torque cones for the pipes.
Thread
Thread Starter
Forum
Replies
Last Post
