Another Damn Handlebar Question!
Thread Starter
|
Tourer
Joined: Aug 2010
Posts: 481
Likes: 0
From: where ever sam tells me to
Another Damn Handlebar Question!
I am looking fo a set of bars for my FB. I like the looks of the Biltwell Keystones. The delimma I am having is with the FB being 35.03 inches wide, and the bars only being 28" in overall width, is that too narrow for the beast? I know that I am going to get alot of "it's your ride, do what you like", but just asking for opinions on the overall flow of the bike. They are inexpensive and good looking bars that i could use without having to get new wiring. I have put a 3" tank lift on her and it poses a slight issue with flipping the mirrors like I want to do. 
Outstanding HDF Member
Joined: Aug 2009
Posts: 2,938
Likes: 4
From: NC
Those are gonna be pretty narrow on a Fatbob. I dunno if I would go that route just because of the small 1 inch od and the narrow width. I have found wider Z Bars in 1/14 od that still use 1 inch risers and controls. i will see if I can find em again for ya.Here ya go
http://www.debrix.com/8-1-2-Rise-ZZ-...p/40028-m1.htm
http://www.debrix.com/8-1-2-Rise-ZZ-...p/40028-m1.htm
Thread Starter
|
Tourer
Joined: Aug 2010
Posts: 481
Likes: 0
From: where ever sam tells me to
and then powdercoating. Thanks for the link. I may order them and powder them black (it's a thing I have against chrome). nice bars and I am considering them against the Biltwell brand.
Thread
Thread Starter
Forum
Replies
Last Post
