Odometer Console button
Stellar HDF Member
Joined: Mar 2006
Posts: 3,124
Likes: 255
From: From Long Island, now in So. Cal
This all you need and you should be able to find it a local electronics store and just splice it in.
http://www.allelectronics.com/make-a...SH-OFF//1.html
$1.85
Don't understand why the link comes up blank? Drag link to search bar and you can open it up.
http://www.allelectronics.com/make-a...SH-OFF//1.html
$1.85
Don't understand why the link comes up blank? Drag link to search bar and you can open it up.
BLACK RUBBER BOOT/CAP FOR PB-21
CAT# WPC-2 $0.30 each 100 or more $0.20 each
Quantity: Buy Now
SPST PUSHBUTTON, PUSH ON/PUSH OFF
CAT# PB-21 $1.85 each 100 or more $1.50 each
Quantity: Buy Now
Banned
Joined: Oct 2007
Posts: 1,494
Likes: 5
http://search.digikey.com/scripts/Dk...words=562pb-nd
$2.60
Last edited by NoLongerAmember; Dec 23, 2010 at 07:25 PM.
Thread Starter
|
Tourer
Joined: Feb 2010
Posts: 379
Likes: 2
From: Connecticut
Actually I posted the wrong switch, it needs to be NOMC Normally Open Momentary Closed
http://search.digikey.com/scripts/Dk...words=562pb-nd
$2.60
http://search.digikey.com/scripts/Dk...words=562pb-nd
$2.60
Stellar HDF Member
Joined: Mar 2006
Posts: 3,124
Likes: 255
From: From Long Island, now in So. Cal
Another option is the newer horn switches that come on the Fat Boy as well as other models. Top side of horn switch replaces the odometer / trip / clock switch on the console.
Thread Starter
|
Tourer
Joined: Feb 2010
Posts: 379
Likes: 2
From: Connecticut
I checked the harness and in order to do that I have to pull apart a few zip ties, pull the wires from the sleeve, etc., not too comfortable with that. What about just spinning the wires together and wrap with electrical tape? Wouldn't that be good enough? That way I don't have to tear apart the harness...
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Tourer
Joined: Feb 2010
Posts: 379
Likes: 2
From: Connecticut
Wonder how in depth the install would be? Rewiring? etc?
I checked the harness and in order to do that I have to pull apart a few zip ties, pull the wires from the sleeve, etc., not too comfortable with that. What about just spinning the wires together and wrap with electrical tape? Wouldn't that be good enough? That way I don't have to tear apart the harness...
Splicing, soldering and using shrink tubing is the best way to do it; check out this post by Citoriplus: https://www.hdforums.com/forum/2801748-post524.html
Could you post an image of the current situation in order to be able to give you the proper guidelines?
