06-07 pull back risers for FXD?
Tourer
Joined: Sep 2006
Posts: 466
Likes: 0
From: Land of Green Chile, NM
RE: 06-07 pull back risers for FXD?
KeithB
I had the 4" pulledback risers installed, took about a beer and half. The speedo looks a little goofy standing straight up though. Have a couple pics in the members gallery include my sig pic. Saving some $$ to change out to a chrome cover so that the speedo will kinda blend in to the bars.
I had the 4" pulledback risers installed, took about a beer and half. The speedo looks a little goofy standing straight up though. Have a couple pics in the members gallery include my sig pic. Saving some $$ to change out to a chrome cover so that the speedo will kinda blend in to the bars.
Tourer
Joined: Sep 2006
Posts: 404
Likes: 0
From: Katy, TX
RE: 06-07 pull back risers for FXD?
Have you considered changing the handler bars to a mini ape, similar to the street bob. You could keep the spedo in the smae location and get the same hand position results with a nice clean look.
Jim
Jim
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,555
Likes: 3
From: Clarksburg, PA
RE: 06-07 pull back risers for FXD?
We used the Accutronix mount with a 2005 and older Speedo mount to change bars on my brother's 2006 Superglide.
I have drag bars and Duece style riser's and noticed that the diameter of the riser is 1 1/4".
Just to see if it would work, I took some chrome cable clamps and they fit perfectly on the riser. i bought 3 from Ebay for about $20.00.
I could use the clamps to bolt the 2005 Speedo to the bars if I had to...basically making a cheaper version of the Accutronix mount.
Here are the clamps I'm talking about.
I have drag bars and Duece style riser's and noticed that the diameter of the riser is 1 1/4".
Just to see if it would work, I took some chrome cable clamps and they fit perfectly on the riser. i bought 3 from Ebay for about $20.00.
I could use the clamps to bolt the 2005 Speedo to the bars if I had to...basically making a cheaper version of the Accutronix mount.
Here are the clamps I'm talking about.
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,555
Likes: 3
From: Clarksburg, PA
RE: 06-07 pull back risers for FXD?
I should mention that you can get these clamps in 1", 1 1/4" and 1 1/2", 1 3/8" and 2".
Here is a list of them from J&P Cycles.
Here is a list of them from J&P Cycles.
Thread
Thread Starter
Forum
Replies
Last Post
2007, accutronix, back, bars, change, davidson, fxd, harley, mount, pull, pullback, risers, rivco, speedometer, superglide
