When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
installed pipes and A/C last night. since I wrapped it up around 1:00AM, it took some restraint not to spark it up for effect. Instaed I waited until this morning after I had installed the Kuryakyn Iso grips. My dealer did as advertised, the thing pulls like a train! ( esp. since It's broken in and I can get on it some. The only thing I noticed after about 30 minutes is the idle was running a little high. When i got near my tools again, I first checked the idle throttlem adjustment, and rolled that back, still too high, so i dropped the idle on the carb. It's got a real nice lope at idle now, and when you crack it open, it sounds just like a HD should. I expected more intake plenum noise with the SE A/C kit ( having had Webers with K&N s in the distant past) but it's not too loud, and when I'm deeper into the throrrle all I hear is the pipes in full song.
installed pipes and A/C last night. since I wrapped it up around 1:00AM, it took some restraint not to spark it up for effect. Instaed I waited until this morning after I had installed the Kuryakyn Iso grips. My dealer did as advertised, the thing pulls like a train! ( esp. since It's broken in and I can get on it some. The only thing I noticed after about 30 minutes is the idle was running a little high. When i got near my tools again, I first checked the idle throttlem adjustment, and rolled that back, still too high, so i dropped the idle on the carb. It's got a real nice lope at idle now, and when you crack it open, it sounds just like a HD should. I expected more intake plenum noise with the SE A/C kit ( having had Webers with K&N s in the distant past) but it's not too loud, and when I'm deeper into the throrrle all I hear is the pipes in full song.
hey,
Just wanted to warn ya, you NEED the stage I re-calibration, if you haven't already done it, otherwise you're going WAY too lean!!
I'm also looking to let a little growl out the engine without terrorizing the neighbors when I spark it up at 0600. .
My neighbors must love me , lol . I have Vance & Hines Straight shots ,and sometimes take my bike to work , too bad I have to leave for work at 2:30AM , lol
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.