Risers for those who like stock bars
Thread Starter
|
Cruiser
Joined: Apr 2011
Posts: 234
Likes: 2
From: Southern NM
Risers for those who like stock bars
I wanted the stock bars but need a little pullback. Found some RIVCO risers that fit the bill, 3" rise and 2" pullback. Look nice and are beefy, about the same price as HD 3" riser but more pull back.
Road Captain
Joined: Oct 2010
Posts: 724
Likes: 2
From: SC Lowcountry
I've been eyeballing these for my 2010 FXDC. Not the size the OP is referring to, but similar.
http://www.rivcoproducts.com/product...cat=286&page=1
http://www.rivcoproducts.com/product...cat=286&page=1
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
I could be wrong, but I don't think risers are model-specific. They're quite generic. That's the beauty of it. 
Only time you need certain risers is if you're running a spring er front end.
Only time you need certain risers is if you're running a spring er front end.
Thread Starter
|
Cruiser
Joined: Apr 2011
Posts: 234
Likes: 2
From: Southern NM
You're right but that's 1" above stock, it come to about 3" when I measured it on the bike.
Thread
Thread Starter
Forum
Replies
Last Post
that$pit
Frame/Suspension/Front End/Brakes
0
Mar 5, 2015 09:27 PM
