Oil slobber....looking for a fix
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 117
Likes: 0
Oil slobber....looking for a fix
so i have this air breather that was custom made and i had left it alone cause i didn't think i would get slobber from it... but long story short i do get some on long rides and its a bitch to clean up. i called my STEALER and he said they done make any thing to fix it, so i knew he was full of ****, what are you ppl running to stop the slobber
Road Warrior
Joined: Apr 2010
Posts: 1,739
Likes: 10
From: Suffolk, England
Without some close-up pics its not possible to suggest a fix. However, if its breathing externally (i.e. not being fed into the carb/throttle-body) then one of the other breather kits should fix it.
Outstanding HDF Member
Joined: Jun 2011
Posts: 3,036
Likes: 19
From: Savage, MN
I know this sounds elementary but you not running to much oil are you? When you say slobber I am guess you mean oil not sure what else it would be. I would check the dip stick and if its at the full or above I would drain a little and see if that helps. Just a thought
Thread Starter
|
Cruiser
Joined: Mar 2010
Posts: 117
Likes: 0
yea mine does not breather back into the intake, my intake doesn't allow for it so i was looking for and aftermarket kit to try and solve the problem. im looking for more of that crossover tube set up but like i said the guy told me it wasn't made for my bike so i was thinkin i was gonna have to end up making my own.
what company has em for 07 street bob vie been looking but no avail
what company has em for 07 street bob vie been looking but no avail
Thread
Thread Starter
Forum
Replies
Last Post
travistodd1
Exhaust System Topics
2
Jan 10, 2014 11:26 AM
