Inner Cam Bearings
Thread Starter
|
Cruiser
Joined: Nov 2011
Posts: 156
Likes: 0
From: Minnesota
Inner Cam Bearings
Does anyone know what brand of bearings the dealer sells as the replacement for the POS caged rollers that are in there now? I've read a bunch from you folks indicating that the Torrington B148 is THE bearing to use for a TC 88. I took a peak at the ones at the dealer and they were full complement bearings but I didn't think to ask for the mfr. I can't find anyone locally that has the Torrington B148 on hand, they'd need to order them. Should I just get the ones from the dealer or order the Torringtons?
Thanks for the advice, Dave
ps I used the Autozone blind hole puller to get the OEM bearings out. Worked sweet!! Thanks for the hint on that one!!!
Thanks for the advice, Dave
ps I used the Autozone blind hole puller to get the OEM bearings out. Worked sweet!! Thanks for the hint on that one!!!
Club Member
Joined: Jun 2009
Posts: 5,323
Likes: 37
From: NJ
Timkin and Torrington can be ordered on line from various vendors. I got mine for like 7 bucks each. Keep in mind if your not going to build your motor out past 100 hp the INA work just fine. Ina have been known to come apart in motors over 100 hp.
Thread
Thread Starter
Forum
Replies
Last Post
