Highay peg clevis length????
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,014
Likes: 0
From: Brewton, Al
Highay peg clevis length????
Can someone give me the length of the highway peg clevis(holds peg to mount) got mounts and not clevis or pegs so I need to make sure to get right length.
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 48
From: Ogden, UT
Use 3/8" x 1.5" bolts with nylock nuts. Maybe 5/16" bolts, not sure on newer models, mine came with nut and bolt setup. Use stainless hardware, available at Lowes or Ace.
Last edited by 8541hog; Apr 5, 2012 at 07:17 AM.
Thread Starter
|
Road Master
Joined: Aug 2008
Posts: 1,014
Likes: 0
From: Brewton, Al
sorry guys. thatnks for the help. but this is what im looking at.
http://www.ebay.com/itm/NEW-KURYAKYN...-/130590567166
i was wandering if this was correct for dyna highway mounts. (i have the part that goes to the frame) trying to be a cheapo, i bought them on ebay and was going to peice together some highway pegs.
i know on sportsters one is longer than the other. so i was just wandering if the 3.5 inch would have the pegs out far enough to be usable. looks right but just wanted to double check.
thanks
http://www.ebay.com/itm/NEW-KURYAKYN...-/130590567166
i was wandering if this was correct for dyna highway mounts. (i have the part that goes to the frame) trying to be a cheapo, i bought them on ebay and was going to peice together some highway pegs.
i know on sportsters one is longer than the other. so i was just wandering if the 3.5 inch would have the pegs out far enough to be usable. looks right but just wanted to double check.
thanks
Road Master
Joined: Jul 2011
Posts: 1,124
Likes: 31
From: kansas
Were you asking me? I measured it and its the same size as the one your looking at. I would like to be out at least and inch maybe 2 more inches.
Thread
Thread Starter
Forum
Replies
Last Post
