Smart Tune
Thread Starter
|
Road Captain
Joined: Apr 2011
Posts: 735
Likes: 23
From: New Brunswick, Canada
Got it retuned thursday,the tech could'nt believe what happened,it was working fine when I got it tuned the first time,the ecm must have over ridden something,anyways,it's working fine again.
First off in my last post I said it was shaking a lot more than normal and had me very concerned,guess what?the neck bearing was real loose,so he adjusted that before and runs of course,now it's smooth like it was before at higher speeeds,not counting winds of course.
He showed me the tables on the laptop,he added a fair amount of fuel,example,84 went to 101,then other were as high as 109,etc,this stuff is over my head,but he added more fuel in the botten end,said he didn't touch the top end,that part of the tune was working fine.The decell popping is almost gone I really have to make it do it now,like wot and then let the bike brake itself then I might get a little popping from that,but just regular ridding and different throttle positions it's more like a gurrle now,about the same as when it was first tuned,so hopefully this tune takes and I won't have to retune again,I should mention also,the tech said it was a fair amount warmer yesterday than the first time he tuned,it was in the low 60's the first time and yesterday it was mid 70's,and that can make a difference,time will tell. I should also mention that he raised the rev limiter from 6200 to 6500,the wife said she hit it a couple times so the tech raised it a bit.
Thanks everyone who replyed,a person can really learn alot just by reading posts from the very knowalable people on here.
Thanks.
First off in my last post I said it was shaking a lot more than normal and had me very concerned,guess what?the neck bearing was real loose,so he adjusted that before and runs of course,now it's smooth like it was before at higher speeeds,not counting winds of course.
He showed me the tables on the laptop,he added a fair amount of fuel,example,84 went to 101,then other were as high as 109,etc,this stuff is over my head,but he added more fuel in the botten end,said he didn't touch the top end,that part of the tune was working fine.The decell popping is almost gone I really have to make it do it now,like wot and then let the bike brake itself then I might get a little popping from that,but just regular ridding and different throttle positions it's more like a gurrle now,about the same as when it was first tuned,so hopefully this tune takes and I won't have to retune again,I should mention also,the tech said it was a fair amount warmer yesterday than the first time he tuned,it was in the low 60's the first time and yesterday it was mid 70's,and that can make a difference,time will tell. I should also mention that he raised the rev limiter from 6200 to 6500,the wife said she hit it a couple times so the tech raised it a bit.
Thanks everyone who replyed,a person can really learn alot just by reading posts from the very knowalable people on here.
Thanks.
Last edited by crazyanimal; May 25, 2012 at 07:43 AM. Reason: forgot info
Thread
Thread Starter
Forum
Replies
Last Post
rwt
Ignition/Tuner/ECM/Fuel Injection
40
Aug 5, 2015 07:54 PM
RK14SGS
Ignition/Tuner/ECM/Fuel Injection
2
May 19, 2011 08:44 PM
