my prototype windshield stereo case for dyna's
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
my prototype windshield stereo case for dyna's
ok alot of you might know i love to travel ALOT with my streetbob. i travel thousands and thousands of miles on my bike a year.going to diffrent rallies and such stuff.well sometimes while iam riding,i'll get bored and need some tunes to pass the time,espically going threw the boring flat states.and i dont trailer my bike no were,unless its broke.i cant stand wearing headphones well riding.so i have looked at diffrent stereo systems for a bike on the market.and ill be damned if i was going to spends $400-900 for a stero system,that ill only use when iam traveling.besides that it will sit in the garge.so since i do alot of prototype work on concept vechilesand work with all diffrent kinds of materails.from metal,plastics,wood ,clay and so on.i decided to make my own case.so i built a vacuum form machine,it took me awhile to make the machine and the molds.but since i used to be a machine builder,it wasnt that bad to make.so here it is,its not copmpletely finished yet,still have to cut the speaker holes out,rivet it together and wire it up.but its pretty close to being finished.and i was so happy on how its going..so i figure i would show you guys,another one of my crazy ideas 
.nice thing about it will be,when i get to my distination.i can unplug it and take my windsheild off and put it in my tent or hotel room.within seconds.so here is some pics of my molds and case.so enjoy 
.so what you guys think?
.nice thing about it will be,when i get to my distination.i can unplug it and take my windsheild off and put it in my tent or hotel room.within seconds.so here is some pics of my molds and case.so enjoy .so what you guys think?
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: my prototype windshield stereo case for dyna's
some more pics
[IMG]local://upfiles/8042/C0C57CDB38EE464B8D04C2E9D0481B4A.jpg[/IMG]
[IMG]local://upfiles/8042/CDC6E8BB223D4507979D5253332EEF18.jpg[/IMG]
[IMG]local://upfiles/8042/F2A4FAF30D8B4C0F925790C3AC60F527.jpg[/IMG]
[IMG]local://upfiles/8042/C0C57CDB38EE464B8D04C2E9D0481B4A.jpg[/IMG]
[IMG]local://upfiles/8042/CDC6E8BB223D4507979D5253332EEF18.jpg[/IMG]
[IMG]local://upfiles/8042/F2A4FAF30D8B4C0F925790C3AC60F527.jpg[/IMG]
Road Warrior
Joined: Dec 2006
Posts: 1,492
Likes: 1
From: MA
RE: my prototype windshield stereo case for dyna's
Jackyl,
I'm often amazed at the creativity of Dyna owners to get the exact look and features that they want/need in their scoot. Every time I think a new idea can't be topped, I see something else that makes me realize that there is no end to the possibilities.
For your new stereo all you need to do is get 12V to your system - and it's self contained. Perfect.
Keep the thread alive by posting new pics when the speakers and head unit are installed!
I'm often amazed at the creativity of Dyna owners to get the exact look and features that they want/need in their scoot. Every time I think a new idea can't be topped, I see something else that makes me realize that there is no end to the possibilities.
For your new stereo all you need to do is get 12V to your system - and it's self contained. Perfect.
Keep the thread alive by posting new pics when the speakers and head unit are installed!
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: my prototype windshield stereo case for dyna's
glide05 lol,are you reading my mind again? my next idea ,iam going to try is a heated seat skin.that you slip over your seat ,that will be done hopefully in the next few months.my goal is to make any dyna ,sportster or softail to beable to make thier bike into a tourbike.within minutes and beable to strip it down in mintes.2 bikes in 1.then when you get to your distination you can strip your bike down to nakedand have your streetbike.then you dont have to spend 20,000 to 30,000 on a tourbike.quick,easy ,inexpensive is my modo.never say never on anything.i keep posting on this thread until its done.
,that will be done hopefully in the next few months.my goal is to make any dyna ,sportster or softail to beable to make thier bike into a tourbike.within minutes and beable to strip it down in mintes.2 bikes in 1.then when you get to your distination you can strip your bike down to nakedand have your streetbike.then you dont have to spend 20,000 to 30,000 on a tourbike.quick,easy ,inexpensive is my modo.never say never on anything.i keep posting on this thread until its done.
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: my prototype windshield stereo case for dyna's
iam think of putting 2 cigerette lighter outlets on the front face for a light and my fuzzbuster or for peoples heated gear .kinda like this.you have to look at the pic.cant see it from the thumbnail
[IMG]local://upfiles/8042/7EDBCAAC6627444D950CB2511BFB7AB4.jpg[/IMG]
or for peoples heated gear .kinda like this.you have to look at the pic.cant see it from the thumbnail[IMG]local://upfiles/8042/7EDBCAAC6627444D950CB2511BFB7AB4.jpg[/IMG]
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
Trending Topics
Road Warrior
Joined: Oct 2006
Posts: 1,506
Likes: 1
From: eastern shore, md.
RE: my prototype windshield stereo case for dyna's
man...nice job jackyl....youve got skills bro!
good work...keep those pics coming!
good work...keep those pics coming!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,225
From: the 50s & the 60s
RE: my prototype windshield stereo case for dyna's
ORIGINAL: jackyl
.................................................. ..................................
so since i do alot of prototype work on concept vechilesand
work with all diffrent kinds of materails.from metal,plastics,wood ,clay and so on.
.................................................. ...................................
so i built a vacuum form machine,it took me awhile to make the machine and the molds.
.................................................. ..................................
.so what you guys think?
.................................................. ..................................
so since i do alot of prototype work on concept vechilesand
work with all diffrent kinds of materails.from metal,plastics,wood ,clay and so on.
.................................................. ...................................
so i built a vacuum form machine,it took me awhile to make the machine and the molds.
.................................................. ..................................
.so what you guys think?
I am a modeller/moldmaker, so I can really appreciate the effort.
Your trade allows you to realize a dream.
Whether it is yours or a clients, makes no difference.
I can make anything except a pure blooded WildCat kitten.
Looks like you can too.
The boombox housing should be extremely marketable.
How much does it cost to build a vacuum forming machine??
Keep up the good work.
mud
