Full length chin spoiler for Dyna
Thread Starter
|
Road Master
Joined: May 2013
Posts: 846
Likes: 8
From: Yuba City, California
Full length chin spoiler for Dyna
Here's my first mock up of a thought of making my own full length chin spoiler since all the ones for Dynas are small little things. Still have a few more things to mock up and I already have the mounting figured out, but going to have to re-route the clutch cable. I'm going to be adding a 5 degree rake on it so it may come out a little bit further. And yeah of course there will be openings for the oil cooler and so are can get to the jugs.
Road Warrior
Joined: Apr 2007
Posts: 1,525
Likes: 4
From: Johnson City TN U.S.A.
Cool project. I do the same sort of mods so maybe a little brain poking might help.
1) The oil filter, as you mentioned. Make this something you monitor closely.
2) Overall weight. It's going to get a lot of vibration. Think about shake and break.
3) May help to have vent slots at the bottom for high-speed air bleed-off.
Keep up the good work
1) The oil filter, as you mentioned. Make this something you monitor closely.
2) Overall weight. It's going to get a lot of vibration. Think about shake and break.
3) May help to have vent slots at the bottom for high-speed air bleed-off.
Keep up the good work
Thread
Thread Starter
Forum
Replies
Last Post
wbill1666
General Topics/Tech Tips
72
Sep 2, 2020 09:13 PM
