asap help please
Thread Starter
|
Cruiser
Joined: Apr 2013
Posts: 133
Likes: 0
From: Ohio
asap help please
so i just finished my build.... see my sig below.... went to fire it up but i get NO FUEL TO THE PISTONS anyone got any suggestions? i had a fuel issue before the build but i got a new relay and it worked fine after but now that i am back together i get a fuel pump primer on ignition but no fuel when i hit the start button, what am i missing :/
Thread Starter
|
Cruiser
Joined: Apr 2013
Posts: 133
Likes: 0
From: Ohio
2 reasons
it cranks but i get no fuel to the cylinders (smelled plugs plus tried crank with no plugs in to smell for gas)
if i drop feed the gas into the intake it fires right up and runs until i cant keep up with the dropper
i get the p0261 p0263 error after i crank it but the fuel pump primes
it cranks but i get no fuel to the cylinders (smelled plugs plus tried crank with no plugs in to smell for gas)
if i drop feed the gas into the intake it fires right up and runs until i cant keep up with the dropper
i get the p0261 p0263 error after i crank it but the fuel pump primes
Thread Starter
|
Cruiser
Joined: Apr 2013
Posts: 133
Likes: 0
From: Ohio
yes i do have a quick release i have checked it a few times..... but maybe it wasnt still right ( i have had a few adult style beverages at this point) infact enough to forget what injector wire goes to what injector black or yellow and enough to not screw with it any more this evening but i will for sure check my quick release again asap!
btw true story i screwed with it so much does anyone have any idea what wire goes to what uinjector the manual doesnt help much and im slightly buzzed
but i will be on that quick release
btw true story i screwed with it so much does anyone have any idea what wire goes to what uinjector the manual doesnt help much and im slightly buzzed
but i will be on that quick release
Road Master
Joined: Dec 2008
Posts: 868
Likes: 30
From: western north carolina
Had my 2008 not start ,found the HD relays are a pile of crap. Changed relays so far so good. It was throwing injector codes also at the time.
Trending Topics
Road Captain
Joined: Mar 2013
Posts: 600
Likes: 2
From: Kansas
Switch the relays and see if it starts. The starter relay may be bad. Is the line pressurizing? Pump running?
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo