Pulley Botls for 2007 Street Bob FXDB
Thread Starter
|
Intermediate
Joined: Apr 2013
Posts: 30
Likes: 0
From: Arizona
Pulley Botls for 2007 Street Bob FXDB
Had the whole rear wheel taken down including the pulley for powdercoating. Have read that the bolts need to be replaced or they will sheer as they are one time use only. Can someone link me to the proper bolts? I have the size (7/16-14x2-1/2) but there are to many results when I google this with different looking bolts etc. Sorry, I'm new to this and don't exactly trust my indy shop with something this potentially catastrophic.
Had the whole rear wheel taken down including the pulley for powdercoating. Have read that the bolts need to be replaced or they will sheer as they are one time use only. Can someone link me to the proper bolts? I have the size (7/16-14x2-1/2) but there are to many results when I google this with different looking bolts etc. Sorry, I'm new to this and don't exactly trust my indy shop with something this potentially catastrophic.
Some interesting info on sheered bolts to be found over here:
https://www.hdforums.com/forum/dyna-...l#post10164106
Road Master
Joined: Jan 2010
Posts: 859
Likes: 14
From: Millsboro Delaware
I just replaced my bolts as I had taken my pully off to do some work. I orderd new bolts from Ronnie's HD online. Fast shipping and very inexpensive. I did not want to mess around with improper bolts as it can be rather disastrous if they fail.
Road Captain
Joined: Nov 2011
Posts: 633
Likes: 1
From: Southern Indiana
As a side note, my dealer (just talked to yesterday) said to stay away from the HD pulley bolts in CHROME as they have had failures. Use caps if you want chrome
Road Captain
Joined: Mar 2010
Posts: 525
Likes: 10
From: NJ
Had the whole rear wheel taken down including the pulley for powdercoating. Have read that the bolts need to be replaced or they will sheer as they are one time use only. Can someone link me to the proper bolts? I have the size (7/16-14x2-1/2) but there are to many results when I google this with different looking bolts etc. Sorry, I'm new to this and don't exactly trust my indy shop with something this potentially catastrophic.
The link is below
https://www.hdforums.com/forum/dyna-...stuff-out.html
Thread
Thread Starter
Forum
Replies
Last Post
