Risers on '14
Thread Starter
|
Cruiser
Joined: Dec 2007
Posts: 137
Likes: 0
From: Tennessee
Risers on '14
I have a '14 Bob with mini apes and stock 1" risers. Anout how high can I go on the risers (total or additionally) without changing cabels and lines? Straight, not pullback.
Thnx
Thnx
Road Captain
Joined: Jan 2010
Posts: 548
Likes: 1
From: Cardboard Box
Your risers and bars have around 12" in total height, and they are pretty wide at around 31" with a good amount of pullback. Taking that all into consideration you can probably hit a good 15-16" with no cable or line changes if the bars you switch to aren't super wide. I'm sitting at 13" total between my bars and extensions (to the top of the cross bar) and still have slack because my bars are only around 28" wide and only have around 2.5" of pullback.
Thread Starter
|
Cruiser
Joined: Dec 2007
Posts: 137
Likes: 0
From: Tennessee
Ok, that was a terrific answer but a lot more technical than I was thinking. So, basically, if I'm staying with the stock bars and I just want to raise them up,....I could change my current risers 3" to 3 1/2" risers or 2" to 2 1/2" riser extensions to my existing...and I should be ok. (?)
Road Captain
Joined: Jan 2010
Posts: 548
Likes: 1
From: Cardboard Box
Ok, that was a terrific answer but a lot more technical than I was thinking. So, basically, if I'm staying with the stock bars and I just want to raise them up,....I could change my current risers 3" to 3 1/2" risers or 2" to 2 1/2" riser extensions to my existing...and I should be ok. (?)
Advanced
Joined: Sep 2013
Posts: 96
Likes: 0
From: cleveland ohio
I have a set of add on risers and bolts if your interested.. I forgot what brand they are but if you have the same style riser as the wide glider (2013) they will work.. I can't remember if its 2or 3 inches I think 3
Thread
Thread Starter
Forum
Replies
Last Post
