2014 Low Rider

Closed Thread Subscribe

Thread Tools

Search this Thread

May 16, 2016 | 09:47 PM

#3611

Ikelove

Thread Starter

Seasoned HDF Member

Joined: May 2014

Posts: 15,468

Likes: 14,364

From: Illinois

I have to give Two Brothers props. They make a damn nice HD exhaust.

May 17, 2016 | 12:27 PM

#3612

Ikelove

Thread Starter

Seasoned HDF Member

Joined: May 2014

Posts: 15,468

Likes: 14,364

From: Illinois

Quote:

Originally Posted by SquishyLowRider

Yeah it is. That's pretty much what mine sounds like too.

TBR make a quality product. On my last few YZ450Fs, I ran their pipes. I never had an issue with any of them for the four or five years that ran those.

I have watched thousands of HD exhaust videos on youtube over the last two years and have to say that the TB HD exhaust you have is one of the best.

May 17, 2016 | 05:25 PM

#3613

baka1969

Extreme HDF Member

Joined: Jan 2012

Posts: 12,986

Likes: 715

From: NE Philly

It looks like the '17 LR will finally come in red. This might be tempting.

May 17, 2016 | 09:20 PM

#3614

SBRob

Seasoned HDF Member

Joined: Oct 2008

Posts: 7,649

Likes: 4,889

From: Missouri City,TX

Quote:

Originally Posted by baka1969

It looks like the '17 LR will finally come in red. This might be tempting.

Go for it...

May 17, 2016 | 09:40 PM

#3615

Super08

Supporter

Joined: Jun 2015

Posts: 1,046

Likes: 69

From: Alberta

A red Low Rider will look killer!

May 18, 2016 | 05:40 AM

#3616

PacoElProfesor

Advanced

Joined: Apr 2016

Posts: 85

Likes: 6

From: Laredo, Texas

Anyone know what size bushings the standard low rider risers use? I've been looking at different poly and solid bushings and based on part numbers, the 2014-2016 bushings seem to be a different size than street bobs, etc. Any thoughts?

May 18, 2016 | 09:01 AM

#3617

14LowLow

Cruiser

Joined: Apr 2016

Posts: 245

Likes: 33

From: Iowa

Quote:

Originally Posted by Iron obsessed

At last...so happy, I feel though I'm never done!

Super shox, powder coat springs..= 😁

Great looking bike! I'm a big fan of the powder coated springs, looks and longevity are always a plus. I see you have a detachable backrest setup. I've been trying to figure out how to do this exact same setup as I just got a detachable, but really don't want to relocated the turns. What brackets and hardware did you use to achieve this look?

May 18, 2016 | 10:04 AM

#3618

Super08

Supporter

Joined: Jun 2015

Posts: 1,046

Likes: 69

From: Alberta

You don't have to relocate them, there is a kit that puts the docking hardware at the base of the signal lights. I am not sure which kit is used for the Low Rider as mine had them relocated for the saddlebags I had. Here is the kit for the Wide Glide, not sure if it can be used on the Low Rider.

http://www.harley-davidson.com/app-c...ts/-J04974.PDF

Here is a pic of the kit installed on a Wide Glide from another thread. I am thinking you may need the rear signals off the Wide Glide to make it work. Once Iron Obsessed sees your question he should be able to tell you more than I can.

Last edited by soldierbot; Apr 2, 2021 at 07:46 AM.

HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders