Weird Experience with LEDs/Load Balancer
Thread Starter
|
Stage III
Joined: May 2020
Posts: 3
Likes: 0
From: Green Bay, WI
Weird Experience with LEDs/Load Balancer
Before I start, I will say I searched the forums here and couldn't find my exact issue so I'm hoping someone can help.
I recently picked up a 2013 Street Glide and installed these and am having issues with hyperflashing as well as the red "key" light turning on on my dash. I learned after the fact that '14 and lower would need help with the LEDs, so I drove to my local dealership where they sold me a Custom Dynamics Load Balancer, which they assured me would fix my problem. I installed it and when I turned the power on, the blinkers were back to normal and the error light went away. However, the next time I actually started the bike up and rode it, the hyperflashing returned, but no error light. There is a switch on the balancer that I have tried in both positions but I'm still not having any luck.
Anyone else have this problem and care to share how they fixed it?
I recently picked up a 2013 Street Glide and installed these and am having issues with hyperflashing as well as the red "key" light turning on on my dash. I learned after the fact that '14 and lower would need help with the LEDs, so I drove to my local dealership where they sold me a Custom Dynamics Load Balancer, which they assured me would fix my problem. I installed it and when I turned the power on, the blinkers were back to normal and the error light went away. However, the next time I actually started the bike up and rode it, the hyperflashing returned, but no error light. There is a switch on the balancer that I have tried in both positions but I'm still not having any luck.
Anyone else have this problem and care to share how they fixed it?
Outstanding HDF Member
Joined: Feb 2015
Posts: 2,414
Likes: 433
From: Arkansas
Here is an installation video of the CD signal stabilizer: https://www.youtube.com/watch%3Fv%3D...7WzcK4cAcUss7F
install instructions: https://www.customdynamics.com/media...s/GEN2-SS6.pdf
TSSM Reset: https://www.customdynamics.com/media...TSSM_Reset.pdf
install instructions: https://www.customdynamics.com/media...s/GEN2-SS6.pdf
TSSM Reset: https://www.customdynamics.com/media...TSSM_Reset.pdf
Road Warrior
Joined: Jun 2018
Posts: 1,643
Likes: 677
From: Arm pit of America, S.D.
Last year I bought the RBT & Brake light flasher + load balancer from C D ('02 Standard) , Had to call them for help , they walked me through the switch, dimmer & brake flasher speed. Once all was set the guy said , Don't worry we get this call all the time.
Thread
Thread Starter
Forum
Replies
Last Post
