Handle Bar Controls
Thread Starter
|
Stage I
Joined: Feb 2021
Posts: 1
Likes: 0
From: Edmonton
Handle Bar Controls
Hello everyone, I have a 2010 Street Glide, I have a question about the wiring for the handle bar controls. When i had the stock radio in it the controls would work sometimes. I thought it was the radio so I upgraded radios. I have a Handle bar control box to do go with my Atoto A6 Double din radio. The volume controls aren't working, and only the up and down work on the throttle side of my radio controls. I found a wiring diagram online and only have .09V on 4 of the 8 wires. I have .09V at the switch and when I move the toggle it will drop to 0V. From what I understand the pink/white wire is ground as it is shared between the 2 controls. I am looking for to find out what Voltage should be present at the volume switch. Or what other ideas you guys can think of that could be Thank you
Club Member
Joined: Apr 2013
Posts: 7,681
Likes: 8,413
From: Utah
Welcome to the Forum from Utah. The Audio section of the Forum maybe a better place to ask.
https://www.hdforums.com/forum/audio-systems-153/
https://www.hdforums.com/forum/audio-systems-153/
Thread
Thread Starter
Forum
Replies
Last Post
