Radio Shack siren- HD Connector pasrt number?
Thread Starter
|
Advanced
Joined: Jul 2010
Posts: 71
Likes: 2
Radio Shack siren- HD Connector part number?
I installed the TSSM alarm module,set my manual PIN and had the dealer marry the fobs. I've read about folks using the Radio Shack piezo alarm module, but want to attach it to a plug rather than soldering/shoving and taping wires to the connector in the bike ('08 EG Standard).
Does anyone know the part number for the connector that plus into the alarm pigtail in the bike?
Does anyone know the part number for the connector that plus into the alarm pigtail in the bike?
Last edited by rangemaster; Aug 19, 2010 at 10:14 PM.
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
I checked into this and me and the parts manager couldn't find one. The HD siren has the connector molded into its shell, but we couldn't find a stand alone connector to mate with the pigtail. I had some left over AMP or Deutsch sockets and crimped them onto the wire extensions I'd added to the RS siren wires, insulated them with shrink tubing and plugged them into the pigtail.
Carl
Carl
Former Sponsor
Joined: Jan 2009
Posts: 19,364
Likes: 40
From: Los Angeles, CA
I found this in ebay. But i dont know is it the right one or not
http://item.mobileweb.ebay.com/viewi...w=250913586488
http://item.mobileweb.ebay.com/viewi...w=250913586488
Thread
Thread Starter
Forum
Replies
Last Post
cutacroshorty
General Harley Davidson Chat
2
Aug 8, 2006 10:14 AM
