When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have an ultima #18-533 wiring harness that i'm using...problem it is suppose to when you apply your brakes with your turn signals on it is suppose to make the opposite turn signal work as a brake light, instead it just cancels out the turn signal that is engaged. Has anybody out there problem with this particular harness? I would appreciate any help in this matter. Thanks.
i think I would be making a phone call to Ultima on that one. It specifically states in section 4 what the triggers are for the brake and turn signal lights. Their wiring diagram leaves a lot to be desired. :-)
Thanks for your input. Problem is i can't any way to get in touch with ultima for any info. Does anyone have any info on that? Their website has nothing on there for tech support. Thanks Bro...have a good one.
I called midwest cycle supply in missouri who's product that is,but they won't even talk to you without being one of their licensened dealers. i finally decided to just bypass the control box for my brake light. I lose the turn signal brake light function...but i have turn signals and brake lights now. If you figure it out let me know.
easy solution to this is to use the HD or Kuryakyn run/turn/brake light controller. It does exactly the same thing and there is no wiring whatsoever. It simply plugs in under the seat.
Ya mines full custom too and following all works perfect.
Turn signals won't work brake light and hitting the brake will cancel turn signals.
I emailed where I bought it from and see what they say....
I hope I don't have to replace that thing. It took while to wire entire bike.
Originally Posted by UltraNutZ
do all other functions operate properly?
press right turn signal button and the right signals flash 10 times then cancels
press right turn signal button again and the right signals cancel
same 2 procedures above for left side
when pressing both signal buttons do all flashers come on and stay on
when pressing both signal buttons again, do the flashers cancel
what about other functions such as the indicator lights for neutral, oil temp, headlights, etc
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.