Changing Rocker Boxes
#1
Changing Rocker Boxes
I have a 2003 Fatboy and want to change the rocker boxes. It seems like an easy job. Remove the gas tank, slowly loosen the 6 bolts in the reverse order of the torque pattern, change the boxes and gaskets, tighten the bolts to proper torque specs and pattern, re-install the tank. Am I missing anything? This seems like a relatively easy afternoon job.
#2
#3
Here's a pic...
If you're removing the rocker supports I may have a suggestion for you
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below... For all Twin Cams and Evo Big Twins & Sporsters
If you're removing the rocker supports I may have a suggestion for you
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below... For all Twin Cams and Evo Big Twins & Sporsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#4
#5
Unfortunately, I recently took care of the tensioners. I wish I had bought the new boxes 1st. I will be doing top and bottom boxes, and it sounds like I am in for more of a project than I thought.
#6
#7
I paid for the tensioners because I upgraded cams while I was there. A BB kit is in the future as well but want to change the rocker boxes now because they are in really bad shape. The BB kit is probably another year away.
Trending Topics
#8
#9
Join Date: Apr 2010
Location: Long Island, New York
Posts: 7,802
Received 4,982 Likes
on
2,588 Posts