Cam Help

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2017 | 04:01 AM

SLIM DUSTY

Thread Starter

Intermediate

Joined: Mar 2013

Posts: 36

Likes: 0

From: AUSTRALIA

Cam Help

So I'm moving up to a FM 110 Drop in kit. the TW999-6 cams on the website say's comes on extremely early and stays on late. But on the woods website it says 3000rpm and up. I would like to know if someone is running these or can speak of expierance with the cams?

thanks

Sep 17, 2017 | 05:04 AM

HardLuck71

Cruiser

Joined: Apr 2017

Posts: 186

Likes: 3

From: Michigan

I don't have experience with those cams, but like you said on " Woods " website it does say 3000-up so I would go with that

Sep 17, 2017 | 08:25 AM

98hotrodfatboy

Seasoned HDF Member

Joined: Mar 2010

Posts: 21,024

Likes: 7,549

From: Poolville

If you bring the squeeze up to 10.5-10.8. yes they will perform very nicely...

Sep 17, 2017 | 10:51 PM

SLIM DUSTY

Thread Starter

Intermediate

Joined: Mar 2013

Posts: 36

Likes: 0

From: AUSTRALIA

Quote:

Originally Posted by 98hotrodfatboy

If you bring the squeeze up to 10.5-10.8. yes they will perform very nicely...

I get good fuel all around me so prob run 10.8 to 11 I think

Sep 18, 2017 | 05:37 AM

Hillsidecycle.com

Sponsor

Joined: Dec 2007

Posts: 12,084

Likes: 829

Like most cams, they work well set up correctly.
Scott

Sep 19, 2017 | 12:18 PM

fuelmoto

Platinum Sponsor

Joined: Feb 2007

Posts: 7,286

Likes: 4,281

From: Little Chute, WI

The TW-999-6a does make nice broad power, here are a couple dyno charts from recent builds with Fuel Moto 110 drop on kits utilizing the TW-999-6a cams. Note both of these builds were above 110 Tq from 2500-5500 rpm