When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Engine Mechanical TopicsDiscussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.
Who sells a S&S T111 engine lower priced than Dennis Kirk. Thinking about replacing rather than rebuild. Rebuilding has no warranty and S&S gives two years.
Is S&S crank good or will it move over time also. I’m happy with the power of the 103 but a little more would be ok.
My 103 needs crank redone and heads to be freshened up The cylinders honed and new rings along with the cam chest.
Last edited by Johnnypop; Oct 18, 2020 at 07:52 PM.
Who sells a S&S T111 engine lower priced than Dennis Kirk. Thinking about replacing rather than rebuild. Rebuilding has no warranty and S&S gives two years.
Is S&S crank good or will it move over time also. I’m happy with the power of the 103 but a little more would be ok.
My 103 needs crank redone and heads to be freshened up The cylinders honed and new rings along with the cam chest.
any decent shop will have a warrantee for their work,we warrantee all our rebuilds 1 year here
Does S&S warranty their engines to DIY installers?
__________________________________________________ ____ For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support! Ordering & info http://www.rockout.bizOn ebay! ...CLICK HERE Also on amazon.com...
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.