Lifter replacement video/tutorial?
Thread Starter
|
2nd Gear
Joined: May 2023
Posts: 6
Likes: 22
From: Kansas
Lifter replacement video/tutorial?
Have a 2015 RK CVO 110 and need to replace lifters. Are there any good videos and or tutorials on doing the job? Thanks
Last edited by DENALIAKITAS; May 11, 2026 at 08:22 PM.
Road Warrior
Joined: Aug 2007
Posts: 1,561
Likes: 66
From: Oakdale Ca.
Any twin cam video will walk you through it. I have watched the S&S as well as fuel moto videos on youtube basically teaches you to build the bike from the frame up.
Grand HDF Member
Joined: Aug 2008
Posts: 3,599
Likes: 9,905
From: Florida's gorgeous East coast
Since the OP specifically asked for helpful videos, Im going to recommend PacificMike.com . He has over two hundred videos on YouTube that can be accessed there, or directly on his website. Highly recommend.
Seasoned HDF Member
Joined: May 2008
Posts: 21,096
Likes: 12,640
From: South Carolina
You must have a genuine Harley Davidson Service Manual.
Here is a step by step for cam change, this will give you what you need to replace lifters, but does not show how to remove and replace stock one piece pushrods (you do not need to use adjustable pushrods).
Follow the service manual closely, using videos for clarity.
Don`t hesitate to ask questions, you don`t want to be the next guy with a bent valve...
Twin Cam Camshaft Installation Instructions for Harley-Davidson
Here is a step by step for cam change, this will give you what you need to replace lifters, but does not show how to remove and replace stock one piece pushrods (you do not need to use adjustable pushrods).
Follow the service manual closely, using videos for clarity.
Don`t hesitate to ask questions, you don`t want to be the next guy with a bent valve...
Twin Cam Camshaft Installation Instructions for Harley-Davidson
Last edited by Dan89FLSTC; Yesterday at 08:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dceggert
Harley Davidson Videos
5
May 28, 2020 06:19 PM
