Grease fitting on neck

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2015 | 05:53 PM

RHillbilly

Thread Starter

Road Warrior

Joined: Jan 2008

Posts: 1,446

Likes: 8

From: greenwood, mo

Grease fitting on neck

On a softail what year did they start putting grease fitting on neck bearings,my 91 has it I had a 92 softail that didn't have it

Jun 17, 2015 | 07:41 PM

texashillcountry

Dirt don't hurt

Joined: Jan 2011

Posts: 21,066

Likes: 4,561

From: Haslet Texas

Neither my '95 nor my '94 had one.
An indy put one in my '95.

Jun 17, 2015 | 09:42 PM

Jchaiyo

Cruiser

Joined: Jun 2015

Posts: 246

Likes: 28

From: Denver Colorado

My flstf 92 has one...

Jun 18, 2015 | 06:21 AM

98hotrodfatboy

Seasoned HDF Member

Joined: Mar 2010

Posts: 21,118

Likes: 7,643

From: Poolville

None on my 98...... I didn't realize harley would do that. It would take away from their service plan pocket money....

Jun 18, 2015 | 06:57 AM

texashillcountry

Dirt don't hurt

Joined: Jan 2011

Posts: 21,066

Likes: 4,561

From: Haslet Texas

Fair warning if you pump the neck bearings full of grease then you will spend the next 6 months cleaning that grease off your gas tanks, rocker boxes, and down tubes after every ride.

Jun 18, 2015 | 02:22 PM

Uncle G.

Seasoned HDF Member

Joined: Jun 2010

Posts: 9,332

Likes: 3,873

From: Upstate New York

My '94 has one, although it was painted over at the factory. I replaced it with a working one.

FWIW, I pump the steering head full every 5,000 miles, and don't get any significant dripping. Maybe wipe the lower "gap" between the fork and steering stem every couple of weeks. I use the "red" grease from Tractor Supply. I also have 110,000 miles on my current set of head bearings, and they work just fine. Coincidence? I think not.

Jun 18, 2015 | 05:58 PM

RHillbilly

Thread Starter

Road Warrior

Joined: Jan 2008

Posts: 1,446

Likes: 8

From: greenwood, mo

Never seen it on a evo softail guess some do some don't

6 Weirdest Harley-Davidsons Ever Sold to the Public

Verdad Gallardo

7 Times Harley-Davidson Chucked Tradition Out the Window

Verdad Gallardo

7 Surprising Harley-Davidson Products that Are Not Motorcycles

Verdad Gallardo

8 Best Harley-Davidson Motorcycles Ever

Pouria Savadkouei

10 Worst Harley-Davidson Motorcycles Ever

Pouria Savadkouei

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Verdad Gallardo

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Verdad Gallardo

Harley-Davidson Reveals Super Cool Cafe Racer Concept

Verdad Gallardo

Engraved Rebellion: Inside Bundnerbike's Glam Rock II

Verdad Gallardo

10 Motorcycles You Should Never Buy

Joe Kucinski

Jun 19, 2015 | 06:20 AM

Dan89FLSTC

Seasoned HDF Member

Joined: May 2008

Posts: 21,180

Likes: 12,757

From: South Carolina

Quote:

Originally Posted by Uncle G.

I also have 110,000 miles on my current set of head bearings, and they work just fine. Coincidence? I think not.

I have 140,000 miles on my current set of steering head bearings.

I have packed them with grease once, about 10 years ago, and they work fine also.

Jun 19, 2015 | 06:48 AM

#10

Schex

Club Member

Joined: Apr 2011

Posts: 5,817

Likes: 7,850

From: SE Louisiana

Quote:

Originally Posted by texashillcountry

Fair warning if you pump the neck bearings full of grease then you will spend the next 6 months cleaning that grease off your gas tanks, rocker boxes, and down tubes after every ride.

Lucas Red n Tacky grease does a good job of staying.