1985 FXST Shifter Problems
Thread Starter
|
Advanced
Joined: May 2016
Posts: 94
Likes: 3
From: Howe Tx
1985 FXST Shifter Problems
Hello, I have been having problems getting my bike in first gear. I have adjusted the clutch ,unhooked the clutch and messed with the linkage. Right now the tranny is sitting on the bench with the top off. I am thinking it is in the shifter pawl assembly but not sure. I am wandering if any one has a picture of what the pawls and cam are supposed to look like new ? Also how tight is the spring supposed to be ? I didn't take a picture of it but it doesn't look stretched out but also doesn't feel to tight.
Seasoned HDF Member
Joined: Nov 2009
Posts: 15,705
Likes: 22,718
From: Farmington ,MS
How long have you had the bike... Is this a new problem that just started?
Those trans would never just click into first gear...you pretty much had to stomp on it to get it to go.
Those trans would never just click into first gear...you pretty much had to stomp on it to get it to go.
Thread Starter
|
Advanced
Joined: May 2016
Posts: 94
Likes: 3
From: Howe Tx
I've only had the bike a few months. I've just rebuilt the top end as it blew a head gasket . I've tried the stomp bit and it just goes to a dead space. If I pull it up to second then stomp it back down sometimes it will go into first. When down shifting coming to a stop most the time it won't go into first though. It seems like it just started but I've only got about 400 miles total on the bike since I bought it.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
I've never needed to 'stomp' any of my Harleys, nor other bikes for that matter. Mrs B makes a fuss with the Sporty, but it is always easy to ride when I take it out. Your photos all look fine to my eyes, nothing obviously wrong.
I've just commented on Electric Greaseball's thread about his nice new clutch plates. Have you inspected your plates, especially the odd one in the centre?
I've just commented on Electric Greaseball's thread about his nice new clutch plates. Have you inspected your plates, especially the odd one in the centre?
Stellar HDF Member
Joined: Sep 2011
Posts: 3,125
Likes: 1,749
From: In The Woods, PA
I've never needed to 'stomp' any of my Harleys, nor other bikes for that matter. Mrs B makes a fuss with the Sporty, but it is always easy to ride when I take it out. Your photos all look fine to my eyes, nothing obviously wrong.
I've just commented on Electric Greaseball's thread about his nice new clutch plates. Have you inspected your plates, especially the odd one in the centre?
I've just commented on Electric Greaseball's thread about his nice new clutch plates. Have you inspected your plates, especially the odd one in the centre?
Thread Starter
|
Advanced
Joined: May 2016
Posts: 94
Likes: 3
From: Howe Tx
The clutch fibers are new and the steels spec'd out. I set the diaphragm spring within .005 of spec. I have tried just shifting it with the clutch completely off the bike but while I slowly turned the output shaft. I included a picture of the linkage that comes off the tranny because when I try to shift to first the tit/**** bottoms out before it travels far enough to catch first.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Interesting. Do you have the factory service manual? Does it give any advice on setting up that linkage?
Trending Topics
Thread Starter
|
Advanced
Joined: May 2016
Posts: 94
Likes: 3
From: Howe Tx
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Seasoned HDF Member
Joined: Nov 2009
Posts: 15,705
Likes: 22,718
From: Farmington ,MS
Well my guess is you never owned a rotary top 4 speed. The old ratchet top 4 speeds shifted much better...every rotary top I have ever ridden required to be manhandled to shift.
