Replace 2003 revtech 100 Evo motor
Thread Starter
|
Intermediate
Joined: Jan 2017
Posts: 28
Likes: 0
From: Stanton ca
Replace 2003 revtech 100 Evo motor
hey guys. Looking into possibly replacing 2003 revtech 100 Evo with hd motor or s&s. looking for best value and easiest swap to keep price manageable
Road Warrior
Joined: Sep 2014
Posts: 1,482
Likes: 89
From: Missouri
I don't think so. All Evo's was the same across the years. The only different is that the early years seemed to leak more oil though if I remember right. If you can find a used motor with low mileage I'd jump on it.
Road Warrior
Joined: Sep 2014
Posts: 1,482
Likes: 89
From: Missouri
I think that the softtail models are direct bolted. Not sure about the dyna's. Touring is rubber mounted for sure.
Trending Topics
Club Member
Joined: Aug 2008
Posts: 22,825
Likes: 17,832
From: Lafayette, Louisiana
I just quickly went through the classifieds for you and noticed this.
https://www.hdforums.com/forum/showt...6#post15600836
https://www.hdforums.com/forum/showt...6#post15600836
Thread Starter
|
Intermediate
Joined: Jan 2017
Posts: 28
Likes: 0
From: Stanton ca
So it's possible I get a motor with different mounts and will have to change them? The bike is registered as a bmc so I don't know if the mounts would be like the dyna's, touring etc
Last edited by Riide125; Jan 12, 2017 at 11:47 PM.