Exhaust Baffle Problem

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2020 | 11:41 AM

#11

Uncle Larry

Seasoned HDF Member

Joined: Jan 2011

Posts: 157,245

Likes: 56,777

From: Michigan 15 Minutes East Of Hell

Quote:

Originally Posted by Fureek

You can see the one baffle has a broken off end which is laying somewhere in a ditch 2.25” in diameter at the end flange and about 8” long over all.

Unless someone can identify the manufacturer ... stop by a muffler shop and have him deep swedge a piece of ( measure perforated portion ) ?? 1.75 tubing to the OD of the large end of the other baffle, cut it where necessary and weld it on ... Been there, done that

Sep 17, 2020 | 12:39 PM

#12

98hotrodfatboy

Seasoned HDF Member

Joined: Mar 2010

Posts: 20,954

Likes: 7,483

From: Poolville

I'm sure of you took both baffles to a fabricator he can make you a new end and weld it back on.. As long as he had the other one to copy.. Then buy some wrap and bolt it back in..

Sep 17, 2020 | 01:01 PM

#13

Racepres

Seasoned HDF Member

Joined: Jul 2014

Posts: 8,553

Likes: 3,309

From: Cental, MI

Quote:

Originally Posted by Fureek

You can see the one baffle has a broken off end which is laying somewhere in a ditch 2.25” in diameter at the end flange and about 8” long over all.

IDK whose it is... But that is a well designed item... Too bad it failed... I certainly would try to fix that...

Sep 17, 2020 | 01:55 PM

#14

Fureek

Thread Starter

Advanced

Joined: Mar 2019

Posts: 55

Likes: 18

From: Arizona

Quote:

Originally Posted by Racepres

IDK whose it is... But that is a well designed item... Too bad it failed... I certainly would try to fix that...

Dennis Kirk has one that looks like it might fit. Made by drag specialties. I will try to order a pair when I get home from work tonight.

Sep 17, 2020 | 05:00 PM

#15

Uncle Larry

Seasoned HDF Member

Joined: Jan 2011

Posts: 157,245

Likes: 56,777

From: Michigan 15 Minutes East Of Hell

I had a Huth pipe bender in the shop ... I made a lot of custom stainless exhaust for rods and show cars ... this is an easy fix as I mentioned earlier

Sep 17, 2020 | 08:19 PM

#16

Racepres

Seasoned HDF Member

Joined: Jul 2014

Posts: 8,553

Likes: 3,309

From: Cental, MI

Quote:

Originally Posted by Uncle Larry

I had a Huth pipe bender in the shop ... I made a lot of custom stainless exhaust for rods and show cars ... this is an easy fix as I mentioned earlier

I'm gonna stray off Topic here... Larry, could you do Mandrel bends??
You ain't that far from me...and Drag Racing is still a demanding calling!!!