Air Pressure in Handlebars???

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2020 | 04:00 PM

#11

IBDAGRIZ

Road Master

Joined: Sep 2013

Posts: 1,054

Likes: 441

From: Tejas

I drilled and tapped the crash bar like the older ones had. Simple, cheap and I already had it.

Griz

Nov 10, 2020 | 05:06 PM

#12

Idiocracy

Thread Starter

Cruiser

Joined: Apr 2020

Posts: 164

Likes: 74

From: Michigan

Thanks for the responses. I am somewhere between capping the ports at the top of the forks and running a length of 5/16 line to the rear left side cover and capping it with a schraeder valve. I'll probably run the line, I have to take the tanks off anyway, so no reason not to really.

Is there a way to bench test if the anti-dive valve?

Nov 10, 2020 | 05:13 PM

#13

TSheff

Seasoned HDF Member

Joined: Feb 2013

Posts: 11,321

Likes: 3,652

From: SE Texas

Quote:

Originally Posted by Idiocracy

Volumes matters. If you want in near stock you need to do the calculations to determine th actual volume in the bars. I did an 89 Ultra and used a Mini Stainless sample cylinder as a reservoir. I was OK, but not even close to when I just upgraded to cartridges.