When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
replaced my throttle cable, idle cable, rear brake pads,clutch and brake levers and adjusted my carb didn't need em just wanted to have something to post it's kinda slow here,thought i'd liven things up a bit.oh yea I got a new air filter. rant over
You run it pretty hard? Fast highway speeds? I have heard once you start running at 90 or so for an extended time you start goin' through motors.
No, nothin' like that. I was stupid and didn't go through the motor when I put the bike together. The motor sat for 8 years out of the frame and I fiqured 'cause it had good comp. and turned over good I didn't need to worry about it. The center oil hole in the crank pin was plugged and it took about 3500 miles for the bearing to give up.
did some mainenance
what, no oil change?
The motor sat for 8 years out of the frame and I fiqured 'cause it had good comp. and turned over good I didn't need to worry about it. The center oil hole in the crank pin was plugged and it took about 3500 miles for the bearing to give up.
