Starter drive / bendix for early evos
Thread Starter
|
Tourer
Joined: Feb 2008
Posts: 328
Likes: 13
From: Trabuco Canyon, California
Starter drive / bendix for early evos
My starter drive is slipping again...I just replaced it a few years ago with an oem 31443-65B.
Now I am thinking of going aftermarket if the quality might be better.
I have found only 2 after market starter drives:
Accel 151304 (seems to be the same as V-twin catalog part 32-0638?), for $42 - $60)
Standard MC-SDR1 ( seems to be the same as custom chrome cc-25531) for $28 - $35.
Or stick with oem for $50 - 62..?
Which should be the best quality?
Now I am thinking of going aftermarket if the quality might be better.
I have found only 2 after market starter drives:
Accel 151304 (seems to be the same as V-twin catalog part 32-0638?), for $42 - $60)
Standard MC-SDR1 ( seems to be the same as custom chrome cc-25531) for $28 - $35.
Or stick with oem for $50 - 62..?
Which should be the best quality?
Last edited by Mr1986FLST; Jul 24, 2010 at 07:41 PM.
Thread Starter
|
Tourer
Joined: Feb 2008
Posts: 328
Likes: 13
From: Trabuco Canyon, California
I just found some forum discussion saying that "Zen" has a liftetime warranty on theirs...carried by JP cycles....and only $20...
http://www.jpcycles.com/product/383-451
I might go for that one ...does anyone have any experience with zen starter clutch?
http://www.jpcycles.com/product/383-451
I might go for that one ...does anyone have any experience with zen starter clutch?
Cruiser
Joined: Apr 2007
Posts: 181
Likes: 0
From: Chesapeake, VA
I paid the money for an accell once. Only lasted about a year. Went back to OEM. Anyone can say Lifetime warranty. Probably not cost or time effective to claim.
I assume your sig pic is your 1986. I have an 87 . Most of it's been replaced over the years. Sweet looking ride. From the looks of the tranny cover, exhaust and natural finish it's still stock? Your bags appear pristine!
I assume your sig pic is your 1986. I have an 87 . Most of it's been replaced over the years. Sweet looking ride. From the looks of the tranny cover, exhaust and natural finish it's still stock? Your bags appear pristine!
Last edited by IronButt62; Jul 24, 2010 at 09:23 PM.
Thread Starter
|
Tourer
Joined: Feb 2008
Posts: 328
Likes: 13
From: Trabuco Canyon, California
Hey ironButt, your 87 is looking real good too....the bike is still mostly stock, but each year it drifts a little more away...I finally put the CV carb on just recently and cranked it up for the first time with it today...
what is not stock is packed in the garage in case I do a rebuild one day...the tin set is oem from 1999, a special edition that was never sold on a bike, it was sold as a bolt-on tin-set only...the bike originally looked like the one in my avatar pic...those bags were replaced once about 8 years ago...I was lucky to find a new pair of the originals on ebay, which is just about impossible.
As for the starter drive, I haven't been happy with the oem...but maybe i used an "A" version...and now they are using a "B" version so hopefully they improved reliablility.
what is not stock is packed in the garage in case I do a rebuild one day...the tin set is oem from 1999, a special edition that was never sold on a bike, it was sold as a bolt-on tin-set only...the bike originally looked like the one in my avatar pic...those bags were replaced once about 8 years ago...I was lucky to find a new pair of the originals on ebay, which is just about impossible.
As for the starter drive, I haven't been happy with the oem...but maybe i used an "A" version...and now they are using a "B" version so hopefully they improved reliablility.
Stage I
Joined: Jul 2012
Posts: 1
Likes: 0
From: St. louis
hey guys, im working on my 1886 flstc and the bendix drive whent out, the starter will still spin but no movement to engauge. i tried a rebuild kit but the internals are shot. i replaced the drive and now the curcuit breaker going to it just clicks whenever i press the start button. please help if you can.
Seasoned HDF Member
Joined: Aug 2007
Posts: 8,201
Likes: 3,089
From: NW AR
What circuit breaker going to it? There isn't a circuit breaker going directly to it. What exactly is clicking? The starter is not spinning now, correct? Do you get a Clunk or do you get nothing with a breaker opening up? Is the headlight on when you press the start button?
Trending Topics
Outstanding HDF Member
Joined: Nov 2006
Posts: 3,269
Likes: 12
From: NJ
If it's like my 85, there's a big ol solenoid relay that feeds the starter solinoid........mines mounted in front of the rear tire,under the splash guard. when mine wore out it would just click and not feed the starter solenoid
Last edited by HD7585; Jul 11, 2012 at 05:37 PM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Seasoned HDF Member
Joined: May 2008
Posts: 21,194
Likes: 12,777
From: South Carolina
I would stick with the OEM unit, the other ones are junk.
harleymaker456: Start your own thread. Hijacking a thread is rude, and it is difficult to follow 2 conversations at the same time.
harleymaker456: Start your own thread. Hijacking a thread is rude, and it is difficult to follow 2 conversations at the same time.
Last edited by Dan89FLSTC; Jul 11, 2012 at 07:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
