Fml the mech didn't adjust them. I took the pushrods back and they simply just weren't ran up. Couple of hours later everything seems to be ok

 

+1 should have done more research and done it myself I think

 

Your learning. Sometimes there's an easy way to learn and sometimes we learn the hard way. Just glad it wasn't a costly mistake!

After the last misadventure I had with a "Harley Independent Mechanic" leaving me with more major issues by overlooking some very basics I swear I will be the only wrench working on it as long as I can.

Best wishes and Ride On!

 

That wrench needs a good hard slap!!!!

 

Are adjustable Pushrods a little more noisy than stock ones?

 

Nope....

 

Well I have some adjustments I'm going to make this weekend. Thanks everyone

 

Make sure it isn't the cam and pinion gear slab your hearing. Loose clearence although noisy is better than to tight. Double check the gear clearence.

 

Hot cams are noisier by nature so just make sure the lash in the gears is OK, pushrods adjusted right and then ignore the noise that remains...