valve lifter/tappet roller bearing failure .
Thread Starter
|
Road Master
Joined: Oct 2011
Posts: 957
Likes: 2
From: Carlsbad Springs Ontario
lifters ?
Ok. Kidds.
From what i have found , i have some questions for anyone in the know.?
Johnson has been the major manufacturer in the US of HD lifters for many years.
Apperantly Johnson has had some difficulties lately and some **** has happened .??? Can you say " China " ???
Anyone up on this or am i getting bad info.?
From what i have found , i have some questions for anyone in the know.?
Johnson has been the major manufacturer in the US of HD lifters for many years.
Apperantly Johnson has had some difficulties lately and some **** has happened .??? Can you say " China " ???
Anyone up on this or am i getting bad info.?
Seasoned HDF Member
Joined: Aug 2008
Posts: 5,081
Likes: 2,159
From: Ohio
Ultima's are Johnson's, I have tortured Ultima's with a 590 lift Woods square lobed cam and comes back for more. Don't know if China is envolved but a great $99 purchase compared to the collapsed Harley "B's" in the cabinet
Thread Starter
|
Road Master
Joined: Oct 2011
Posts: 957
Likes: 2
From: Carlsbad Springs Ontario
Lifters.
I cant seem to contact parts4powertoys through normal chanels for advise about this but i have a question regarding the lifters they offer.
Im doing a mild top end rebuild on a 90 FLT Evo including a cam change to a Andews EV-27 and have noticed that parts4powertoys offers a standard lifter set part# V-2303 and a more robust set for use with a stronger cam part# V-2303S .
Would i be better off purchasing the heavy duty set or is not suitable for my application .?
Im doing a mild top end rebuild on a 90 FLT Evo including a cam change to a Andews EV-27 and have noticed that parts4powertoys offers a standard lifter set part# V-2303 and a more robust set for use with a stronger cam part# V-2303S .
Would i be better off purchasing the heavy duty set or is not suitable for my application .?
Seasoned HDF Member
Joined: Dec 2010
Posts: 7,736
Likes: 1,524
From: Coromandel Peninsula New Zealand
I cant seem to contact parts4powertoys through normal chanels for advise about this but i have a question regarding the lifters they offer.
Im doing a mild top end rebuild on a 90 FLT Evo including a cam change to a Andews EV-27 and have noticed that parts4powertoys offers a standard lifter set part# V-2303 and a more robust set for use with a stronger cam part# V-2303S .
Would i be better off purchasing the heavy duty set or is not suitable for my application .?
Im doing a mild top end rebuild on a 90 FLT Evo including a cam change to a Andews EV-27 and have noticed that parts4powertoys offers a standard lifter set part# V-2303 and a more robust set for use with a stronger cam part# V-2303S .
Would i be better off purchasing the heavy duty set or is not suitable for my application .?
Get the forged ones, I used them with an EV27 with no worries.
Thread
Thread Starter
Forum
Replies
Last Post
